LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2914 (Body Equipment - Repair - E91) >> Floor, Luggage Compartment, Engine Compartment Trim Panels >> 51 47 156 Removing and installing/replacing left or right capping in luggage compartment >> Necessary preliminary tasks

Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1).

Right side only:  Release screw (2).

Feed out capping (3) towards top/rear.

Fig 1: Identifying Screws And Capping
G06979044Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Guide (1) of capping (2) must be inserted into mountings (3) in body.

Fig 2: Identifying Guide Of Capping And Mountings
G06979045Courtesy of BMW OF NORTH AMERICA, INC.