Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Read out fault memory of DME control unit
Switch off ignition
If necessary, remove radiator cover

Unlock plug (1) and remove.

Release bolt.

Installation:

Replace screw.

Tightening torque 12 14 3AZ .

Remove pulse generator (2).

Fig 1: Identifying Pulse Generator With Plug

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Check stored fault messages.
Now clear the fault memory.