For vehicles with optional extra SA205 (automatic transmission)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Secure flywheel (1) with existing transmission bolt (2) and special tool 11 9 260 .
Installation:
Replace aluminum screws.
Unfasten flywheel screws.
Tightening torque 11 22 1AZ .
Installation:
Flywheel (1) is secured with an alignment pin.
Fit new flywheel screws.
Clean all threads for flywheel screws in crankshaft.