00 00 ... Underbody incl. all visible components: checking for damage, leaks, corrosion
WARNING: This page is about a different car, the 2005 BMW 545i and 2004 BMW 545i. However, it is still accessible from the selected car via links, so may be relevant.
- Visually inspect underbody:
- For leaks (transmission, brake components, steering).
- Damage to underbody.
- Corrosion on underbody.
IMPORTANT:
If damage to the underbody is identified:
- If necessary, remove panels from underbody.
- Check mountings and fixtures and brake and fuel lines for damage and correct installation position.
Rectify identified faults after consulting with customer and issue a separate invoice.