00 00 ... Body and underbody: checking for corrosion and damage - except cavities

WARNING: This page is about a different car, the 2005 BMW 545i and 2004 BMW 545i. However, it is still accessible from the selected car via links, so may be relevant.

Visually inspect the underbody, wheel arches and frame members for rust and damage.

If necessary, remove panels from underbody.
Check mountings and fixtures and brake and fuel lines for damage and correct installation position.

IMPORTANT: If damage to the underbody is identified:

Rectify identified faults after consulting with customer and issue a separate invoice.