Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

DRAWING OFF, EVACUATING AND FILLING THE A/C SYSTEM are not included in the time value given for this work operation

Release screws (1) and bent heat insulation (2) to one side slightly.

Fig 1: Identifying Bent Heat Insulation And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1) and release safety pressure switch (2).

Tightening torque 64 53 14AZ .

Fig 2: Identifying Safety Pressure Switch And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

After installation:

EVACUATE AND FILL AIR CONDITIONING SYSTEM