34 52 535 Replacing a rear pulse sensor: Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Tightening torque 34 51 4AZ .

Clean bore for pulse generator and lubricate with Staburags NBU 12/K grease.

Fig 1: Identifying Wheel Speed Sensor And Socket Head Cap Screw

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Check sensor head prior to installation for external damage, replacing if necessary.