Vehicles as of model year approx. 07/05
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Pull brake hose out of both holders (1).
IMPORTANT:
Grip brake hose at square head (2) so that connecting piece can not rotate in retaining bracket.
Detach brake hose from brake line (3).
Installation:
Tightening torque 34 32 1AZ .
Detach brake hose from brake caliper (4).
Installation:
Tightening torque 34 32 2AZ .
IMPORTANT:
First tighten brake hose on brake caliper.
Move wheels into straight-ahead position.
Insert brake hose in bracket and screw onto brake pipe.
Never twist brake hose when installing it and avoid all contact with parts attached rigidly to the body.
Move wheels into straight-ahead position.
Insert brake hose in bracket and screw onto brake pipe.
Never twist brake hose when installing it and avoid all contact with parts attached rigidly to the body.