Necessary preliminary tasks
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
- Remove expander lock for parking brake shoes.
- Remove wheel hub See 3341153 REPLACING WHEEL BEARING (OUTSIDE DIAMETER 75 MM) ON REAR AXLE SHAFT or 3341153 REPLACING WHEEL BEARING (OUTSIDE DIAMETER 85 MM) ON REAR AXLE SHAFT
Release screws (1).
Installation:
Tightening torque 34 21 3AZ .
Release screws (2) and remove brake carrier (3).
Installation:
Tightening torque 34 21 3AZ .