Stationary brake disc lathe
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Only BMW-approved brake disc lathes may be used!
In the case of stationary brake disc lathes, the brake disc must be removed See 3411220 REMOVING AND INSTALLING/REPLACING BOTH FRONT BRAKE DISCS (BREMBO) or 3411020 REMOVING AND INSTALLING OR REPLACING FRONT LEFT OR RIGHT BRAKE CALIPER (TEVES) .
Please refer to the lathe manufacturer's instruction manual for the exact procedure.