Necessary preliminary tasks
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
- Remove AIRBAG UNIT
NOTE:
Illustrations show multifunction steering wheel (4) removed.
Release screws (1).
Detach decorative trim (3) in direction of arrow from holders (2).
Disconnect associated plug connection and remove complete decorative trim (3).
Installation:
Make sure electrical leads are correctly routed.
Feed wiring harness (4) out of associated holders.
Release screws (1) and remove both multifunction steering wheel switches (2) from decorative trim (3).
Installation:
Make sure there is a uniform gap between both multifunction steering wheel switches (2) and decorative trim (3).