LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2905 (General Electrical System - Repair - E91) >> Switch >> 61 31 221 Removing and installing/replacing both multifunction steering wheel switches >> Necessary preliminary tasks

Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Both multifunction steering wheel switches (1) are connected to each other by the wiring.

Disconnect plug connection (2).

Pull multifunction steering wheel switches (1) in direction of arrow out of steering wheel.

Feed wiring out of steering wheel and remove both multifunction steering wheel switches.

Fig 1: Pulling Multifunction Steering Wheel Switches Of Steering Wheel
G04727609Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Make sure electrical leads are correctly routed.

Installation: 

Guides (2) of multifunction steering wheel switches (1) must be correctly seated in corresponding locators (3) on steering wheel.

Fig 2: Identifying Guides And Multifunction Steering Wheel Switches
G04727610Courtesy of BMW OF NORTH AMERICA, INC.