LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2905 (General Electrical System - Repair - E91) >> Distribution Box, Power Support Points >> 61 14 010 Removing and installing/replacing distribution box (on battery) >> Necessary preliminary tasks

Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1) and remove bracket (2). Tightening torque 61 14 1AZ .

Fig 1: Identifying Bracket And Screws
G04727564Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Unlock plug housing (2) and release in direction of arrow.

Fold up covers on nuts (3).

Unscrew nuts (3). Tightening torque 61 21 2AZ .

Disconnect plug connection (4).

Disconnect plug connection of IBS cable (5).

Fig 2: Identifying Plug Housing
G04727565Courtesy of BMW OF NORTH AMERICA, INC.

Press locking brackets (2) downwards and unclip.

If necessary, using a screwdriver (1), expand locking bracket (2) at lower end and clip out.

Remove power distributor (3) towards top.

Fig 3: Identifying Power Distributor
G04727566Courtesy of BMW OF NORTH AMERICA, INC.