Necessary preliminary tasks
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
- Remove LEFT FRONT SEAT
- Remove FRONT LEFT ENTRANCE COVER STRIP
- Fold back carpet for passenger compartment at front left in direction of travel
Remove USB hub protective socket (1) from footwell insert (2).
Unlock catches (3) with a suitable tool and remove USB hub protective socket cover (5).
Installation:
Make sure USB hub protective socket cover (5) engages correctly on USB hub protective socket lower section.
Seal (4) must not be damaged; if necessary, replace USB hub protective socket cover (5).
Remove USB hub (1) from USB hub protective socket lower section (2).
Installation:
Make sure rubber grommet (4) is correctly seated on USB hub protective socket lower section (2).
Disconnect plug connection (3).