64 52 Air conditioning compressor
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - AIR CONDITIONING COMPRESSOR
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Refrigerant lines to air-conditioning compressor | E70, E71, E72 | M8 | 21 Nm | |
| E60/N47, E61/N47, E81, E82, E87, E88, E90/N47, E91/N47, E92/N47, E84/N47 | M8 | 18.5 Nm | ||
| E92/S65 | M8 | 21 Nm | ||
| 2AZ Oil filler plug, air conditioning compressor | E70, E71, E72 | 30 ± 1 Nm | ||
| E81/N43, E82, E88 | 25 Nm | |||
| 3AZ A/C compressor to carrier | N52, N52K | M8 x 87 | Replace aluminium screw/bolt Replace! Jointing torque Angle of rotation |
10 Nm 180±15 ° |
| M8 x 52 | Replace aluminium screw/bolt Replace! Jointing torque Angle of rotation |
10 Nm 90±15 ° |
||
| N43 | M8 | 23 Nm | ||
| N47 | M8 | 19 Nm | ||
| N54 | M8 | 19 Nm | ||
| N55 | M8 | 19 Nm | ||
| M57 | M8 | 19 Nm | ||
| N62 | M8 | 21.4 ± 3.2 Nm | ||
| N63 | M8 | 21.4 ± 3.2 Nm | ||
| S63 | M8 | 21.4 ± 3.2 Nm | ||
| 4AZ Bracket, pressure line, to compressor | E82/N54 | 7.6 Nm | ||
| 5AZ Bearing support, compressor, to crankcase | E70/E71 | 19 Nm | ||
| 6AZ Electric A/C compressor, to crankcase | E72 | M8 | 21.4 ± 3.2 Nm |