33 55 041 Replacing anti-roll bar link for anti-roll bar on left or right

WARNING: This page is about a different car, the 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 328i, and 2009 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.

Release nut (1), brace with special tool 31 1 140 .

Installation note:

Replace self-locking nut.

Tightening torque 33 55 2AZ .

Release screw (3).

Tightening torque 33 55 3AZ .

Remove stabilizer link (2) towards top.

Fig 1: Identifying Stabilizer Link With Nut And Screw

Courtesy of BMW OF NORTH AMERICA, INC.