LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2885 (Rear Axle - Repair - E91) >> 3332 Control Arms And Struts >> 33 32 035 Replacing a rubber mount for trailing arm in rear axle carrier >> Removing rubber mount

Removing rubber mount

WARNING: This page is about a different car, the 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 328i, and 2009 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.

Mark installation position of rubber mount by way of slot to rear axle carrier.

Remove rubber mount using special tools 33 4 472, 33 4 474, 33 4 475, 33 4 466 and 33 4 465.

Fig 1: Removing Rubber Mount Using Special Tools
G04726498Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals