Installation sequence
WARNING: This page is about a different car, the 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 328i, and 2009 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
- Install rear differential with workshop jack and special tool 33 4 420
- Insert bolts (1) (do not tighten down)
- Insert screw (2) from front and replace nut (do not tighten down)
- Lower workshop jack
- Tighten down screws (1)
Tightening torque 33 17 1AZ
.
- Tighten nut (2)
Tightening torque 33 17 1AZ
.
Courtesy of BMW OF NORTH AMERICA, INC.