33 52 Shock Absorbers
WARNING: This page is about a different car, the 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 328i, and 2009 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - SHOCK ABSORBERS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Shock absorber to thrust bearing | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M10 | Replace support bearing upper part | 27 Nm |
| E90/E92/E93/S65 | M14 | Replace nut | 37 Nm | |
| 2AZ Shock absorber to joint eye | E81/E82/E84/E87/E88/E90/E91/E92/E93/except S65 | M10 | Replace nut | 38 Nm |
| 3AZ Shock absorber/joint eye to camber arm | E81/E82/E84/E87/E88/E90/E91/E92/E93/except S65 | M10 | Replace screws | 60 Nm |
| 4AZ Shock absorber to camber arm | E90/E92/E93/S65 | M12 | Tighten in NORMAL position | 100 Nm |