33 33 Rear Axle Suspension
WARNING: This page is about a different car, the 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 328i, and 2009 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - REAR AXLE SUSPENSION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Rear axle support with rubber mounts to body | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M12 | Follow repair instruction See 3331503 LOWERING/RAISING REAR AXLE CARRIER (SPECIAL TOOL SWZ00-2040) or 3331503 LOWERING/RAISING REAR AXLE CARRIER (UNIVERSAL LIFTER) . | 100 Nm |
| 2AZ Compression strut on body | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M10 | Replace screws Jointing torque Torque angle |
47 Nm 90 ° |
| 3AZ Vibration absorber to rear axle support | E93 | M10 | 56 Nm | |
| E93 | M8 | 27 Nm |