33 17 Rear axle final drive suspension
WARNING: This page is about a different car, the 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 328i, and 2009 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - REAR AXLE FINAL DRIVE SUSPENSION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Rear differential (if nec. with bracket for vibration damper) to rear axle carrier | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M12 (front) | Observe repair instruction. | 100 Nm |
| E81/E82/E84/E87/E88/E90/E91/E92/E93 | M14 (rear) | Observe repair instruction. Replace nut |
165 Nm | |
| 2AZ Vibration damper to bolt connection, rear differential | E81/E82/E84/E87/E88/E90/E91/E93/E92/except S65 | M12 | 68 Nm | |
| 3AZ Vibration damper on bracket | E81/E82/E84/E87/E88/E90/E91/E93/E92/except S65 | M12 | 68 Nm |