33 21 Output Shaft
WARNING: This page is about a different car, the 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 328i, and 2009 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - OUTPUT SHAFT
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Output shaft to rear axle differential drive flange (Torx screw with RIBBED TEETH ) | E81/E82/E87/E90/E91/E92/E93 | M8 | Replace screws | 52 Nm |
| E81/E82/E84/E87/E88/E90/E91/E92/E93 | M10 ZNS3 | Replace screws | 70 Nm | |
| E87 | M10 ZNS | Replace screws | 80 Nm | |
| E90/E92/E93/S65 | M12 | Replace screws | 120 Nm |