24 00 Transmission in general
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - TRANSMISSION IN GENERAL
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Transmission to engine | ||||
| 6 Head Screws | A4S 200R/A4S 270R/A4S 310R/A5S 300J/A5S 310Z/A5S 325Z/A5S 440Z/A5S 560Z/A5S 360R/A5S 390R/GA6HP19Z/GA6HP26Z/GA6HP32Z | M8 | 24 Nm | |
| 6 Head Screws | A4S 200R/A4S 270R/A4S 310R/A5S 300J/A5S 310Z/A5S 325Z/A5S 440Z/A5S 560Z/A5S 360R/A5S 390R/GA6HP19Z/GA6HP26Z/GA6HP32Z | M10 | 45 Nm | |
| 6 Head Screws | A4S 200R/A4S 270R/A4S 310R/A5S 300J/A5S 310Z/A5S 325Z/A5S 440Z/A5S 560Z/A5S 360R/A5S 390R/GA6HP19Z/GA6HP26Z/GA6HP32Z | M12 | 82 Nm | |
| Torx-Screws | A4S 200R/A4S 270R/A4S 310R/A5S 300J/A5S 310Z/A5S 325Z/A5S 440Z/A5S 560Z/A5S 360R/A5S 390R |
M8 | 21 Nm | |
| Torx-Screws | A4S 200R/A4S 270R/A4S 310R/A5S 300J/A5S 310Z/A5S 325Z/A5S 440Z/A5S 560Z/A5S 360R/A5S 390R |
M10 | 42 Nm | |
| Torx-Screws | A4S 200R/A4S 270R/A4S 310R/A5S 300J/A5S 310Z/A5S 325Z/A5S 440Z/A5S 560Z/A5S 360R/A5S 390R |
M12 | 72 Nm | |
| Torx-Screws | GA6HP19Z/GA6HP26Z | M6 | 9 Nm | |
| Torx-Screws | GA6HP26Z | M10 | 38 Nm | |
| Torx-Screws Stahl | GA6HP19Z/GA6L26Z/GA6L45R | M8 | 19 Nm | |
| Torx-Screws Steel | GA6HP19Z/GA6HP26Z/GA6L45R | M12 | 66 Nm | |
| 2AZ Transmission to engine N51/N52/N52K/N53/N54/N55 Aluminium screws are not magnetic | GA6HP19Z/GA6HP26Z/GA6L45R | Replace screws Jointing torque and angle of rotation must be observed without fail | ||
| GA6HP19Z/GA6L45R | M10x30 | Jointing torque Angle of rotation |
20 Nm 90-110 ° |
|
| GA6HP19Z | M10x85 | Jointing torque Angle of rotation |
20 Nm 180-200 ° |
|
| GA6HP19Z/GA6L45R | M12 | Jointing torque Angle of rotation |
25 Nm 130 ° |
|
| 3AZ Reinforcement shell to transmission/extension | A4S 200R/A4S 270R/A4S 310R/A5S 300J/A5S 310Z/A5S 325Z/A5S 440Z/A5S 560Z/A5S 360R/A5S 390R/GA6HP19Z/GA6HP26Z/GA6HP32Z |
M8 | 23 Nm | |
| 4AZ Cover plate for transmission | GA6HP19Z/GA6L45R | M6 | 9 Nm | |
| 5AZ Heat shield, oil sump | GA6L45R | M6 | 8 Nm | |
| 6AZ Air duct plate | GA6HP26Z | M6 | 10 Nm | |
| 7AZ Line cover plate | GA6HP26Z | M6 | 10 Nm |