24 13 Transmission Extension, Bearings, Seals
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - TRANSMISSION EXTENSION, BEARINGS, SEALS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Slotted nut/output flange | A5S 310Z/A5S 440Z/A5S 560Z/A5S 325Z | 120 Nm | ||
| 2AZ Double hexagon nut/output flange | GA6HP26Z | until 09/02 without sealing ring in output flange |
80 Nm | |
| GA6HP19Z/GA6HP26Z | from 09/02 with sealing ring in output flange |
60 Nm | ||
| 3AZ Output shaft nut to output flange | GA6L45R | 22x1.5 | 55 Nm |