23 11 614 Replacing guide tube for clutch release unit (GS6-37BZ/DZ)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: (transmission removed)

Necessary preliminary tasks:

Remove CLUTCH RELEASE BEARING AND RELEASE LEVER from guide tube.

Release screws.

Remove guide tube (1).

Installation:

- Clean thread.

- Install screws with Loctite 243.

- Tightening torque 23 11 2AZ .

Fig 1: Locating Clutch Controller Screw

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Remove sticker (1) and adhesive with a suitable solvent.

Fig 2: Identifying Sticker

Courtesy of BMW OF NORTH AMERICA, INC.