23 21 Transmission Shafts
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - TRANSMISSION SHAFTS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Output flange | S5D 200G/S5D 250G/S5D260Z/S5D 310Z/S6S 420G | Collar nut installed with bolt cement Pretension Release Tighten down | 190 Nm 120 Nm | |
| S5D 280Z/S5D 320Z | Collar nut installed with bolt cement Pretension Release Tighten down | 170 Nm 130 Nm | ||
| S5D 390Z | Collar nut installed with bolt cement Pretension Release Tighten down | 200 Nm 145 Nm | ||
| GS6-37BZ/GS6-17BG | Collar nut installed with bolt cement Pretension Release Tighten down | 170 Nm 120 Nm | ||
| GS6-53DZ | Collar nut installed with bolt cement Pretension Release Tighten down | 200 Nm 140 Nm | ||
| GS7S47BG | Collar nut installed with bolt cement | 200 Nm | ||
| 2AZ Gear to countershaft | 265/Sport | M10 | 60 Nm |