23 11 Case and Cover (6AZ to 10AZ)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CASE AND COVER
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 6AZ Reverse gear shaft to case | B/C/D/E/F/G/H/I/7-speed SMG | M8 | 25 Nm | |
| S5D 310Z/S5D 320Z | M8 | 20 Nm | ||
| B/C/D/E/F/G/H/I/7-speed SMG | M10 | 45 Nm | ||
| 7AZ Support for reverse gear shaft | B/C-transmission | M8 | 25 Nm | |
| 8AZ Bearing holder to rear housing section | B/C-transmission | M6 | 10 Nm | |
| 9AZ Retaining tabs for sealing cap | C-transmission | M6 | 10 Nm | |
| 10AZ Bearing on countershaft | B-transmission | M10 | 90 Nm | |
| C-transmission | M10 | 30 Nm | ||
| C-transmission | M10 | 60 Nm |