23 11 Case and Cover (11AZ to 15AZ)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CASE AND COVER
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 11AZ Screw plug to rear housing section | B/C/D/E/F/G/H/I/7-speed SMG | M20 | 60 Nm | |
| B-transmission | M16 | 40 Nm | ||
| B/C-transmission | M22 | 60 Nm | ||
| 12AZ Sealing caps to rear housing section | B/C-transmission | M6 | 10 Nm | |
| 13AZ Reversing bolt to reversing lever | ZFS-5-16/C-transmission | 43 Nm | ||
| 14AZ Clamping claw to rear housing section | ZFS-5-16/C-transmission | 33 Nm | ||
| 15AZ Screws on detent plate | ZFS-5-16/C-transmission | 9 Nm |