13 62 Senders for Control Unit
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - SENDERS FOR CONTROL UNIT
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Temperature time switch | M21/M51 | 18 Nm | ||
| 2AZ Temperature sensor, water | M60/1/M60/2/M21/M51 | 18 Nm | ||
| all others | 13 Nm | |||
| 3AZ Temperature switch | All | 28 Nm | ||
| 4AZ Temperature sensor, air | All | 13 Nm | ||
| 5AZ Charge-air pressure sensor to bracket | M51/M41 | 4 Nm | ||
| Charge-air pressure sensor to intake manifold | M47 | 5 Nm | ||
| 6AZ Dual temperature sensor (4-pin plug connection) |
M41/M43/M44/S50/S52/M52/M57/M67/M62/M73 | 13 Nm | ||
| 7AZ Air-mass sensor on lower section of intake filter housing | M51 | 3.5 Nm | ||
| Air-mass flow sensor to cylinder head cover | M47/M47TU/M57/M57TU/M57T2 | 4.5 Nm | ||
| 8AZ Pulse generator, camshaft to cylinder head cover | M57 | 4.5 Nm | ||
| M47TU/M57TU | 3.5 Nm | |||
| M57T2 | 2.3 Nm | |||
| 9AZ Intake neck on air-mass flow sensor | M47 | 9 Nm |