11 41 Oil Pump with Strainer and Drive
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - OIL PUMP WITH STRAINER AND DRIVE
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ ASA screws Suction pipe to bedplate. Aluminium screws/bolts are permitted with and without color coding (blue). |
N52K | M6 x 30 | Replace screws. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. Jointing torque Torque angle |
4 Nm 100 ° |
| 2AZ ASA screw Oil pump to bedplate. Aluminium screws/bolts are permitted with and without color coding (blue). |
N52K | M8 x 123 | Replace screw. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. Jointing torque Torque angle |
10 Nm 180 ° |
| 3AZ ASA screws Oil pump to bedplate. Aluminium screws/bolts are permitted with and without color coding (blue). |
N52K | M8 x 31 | Replace screws. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. Jointing torque Torque angle |
10 Nm 90 ° |
| 4AZ ASA screw Chain module to crankcase. Aluminium screws/bolts are permitted with and without color coding (blue). |
N52K | M6 x 16 | Replace screw. Thread repairs are not permitted! Jointing torque and angle of rotation must be observed without fail. Jointing torque Torque angle |
4 Nm 45 ° |
| 5AZ ASA screws Chain module to oil pump. Aluminium screws/bolts are permitted with and without color coding (blue). |
N52K | M6 x 16 | Replace screws. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. Jointing torque Torque angle |
4 Nm 45 ° |
| 6AZ Fillister head bolt Sprocket wheel to oil pump. |
N52K | M8 x 20 | Jointing torque and angle of rotation must be observed without fail. Jointing torque Torque angle |
20 Nm 45 ° |