11 62 Exhaust manifold
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - EXHAUST MANIFOLD
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Exhaust manifold to cylinder head Coat screw connections with CRC copper paste |
All | M6 | Replace nuts | 10 Nm |
| M50/M52/M52TU/M54/M56/S52/S50 US | M7 | Replace nuts | 20 Nm | |
| All/others | M7 | Replace nuts | 15 Nm | |
| M10 | M8 | Upper row of staybolts installed with bolt cement | 23 Nm | |
| M21 | M8 | Replace nuts Retighten after 2000 km Slacken nuts by a 1/4 turn |
12 Nm | |
| M41/M47/M47TU/M51/M57/M57TU | M8 | Replace nuts | 20 Nm | |
| All/others | M8 | Replace nuts | 23 Nm |