11 24 Connecting Rods and Bearings
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CONNECTING RODS AND BEARINGS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ ASA screw (connecting rod bolt) Connecting rod bearing cap to connecting rod. |
N52K | M8 x 47 | Replace screw. Screw washed and oiled. Jointing torque and angle of rotation must be observed without fail. Jointing torque Torque angle |
20 Nm 120 ° |