After installation

WARNING: This page is about a different car, the 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 328i, and 2009 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.

Read out fault memory and delete entries

Move steering column in "bottom" and "extended" position.

IMPORTANT: Risk of damage!
Unclip steering column trim (1) at side with special tool 00 9 323 .

Fig 1: Unclip Steering Column Trim Using Special Tool (00 9 323)

Courtesy of BMW OF NORTH AMERICA, INC.

Tilt steering column trim (1) towards front.

Unclip steering column gap cover (2) from steering column trim.

Installation:

Tilt steering column trim towards rear, align by way of locks to lower section (of steering column trim) and press down.

Fig 2: Identifying Steering Column Trim And Gap Cover

Courtesy of BMW OF NORTH AMERICA, INC.