Adjust toe-in

WARNING: This page is about a different car, the 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 328i, and 2009 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.

Clean thread on tie rod.

Loosen screw (2).

Turn tie rod (3) and if necessary grip tie rod end (1) to adjust toe-in to setpoint value.

Tighten screw (2).

Tightening torque 32 21 2AZ .

If necessary, correct installation position of gaiter.

Fig 1: Identifying Tie Rod With Tie Rod End And Screw

Courtesy of BMW OF NORTH AMERICA, INC.