11 11 Engine Block, Cylinder Crankcase N52K B25
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE BLOCK, CYLINDER CRANKCASE SPECIFICATION
| Bore stage 0 (1) | mm | 82.000+0.014 | ||
| Bore stage 00 (1) | mm | |||
| Bore stage 1 (1) | mm | 82.250+0.014 | ||
| Permitted out-of-round of cylinder bore (1) | mm | 0.005 | ||
| Permitted conicity of cylinder bore (1) | mm | 0.010 | ||
| Permissible total wear tolerance between piston and cylinder (engine operated) | mm | 0.150 | ||
|
||||