LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2838 (Engine And Transmission Mounting - Special Tools - E91) >> 22 Engine And Gearbox Suspension >> 22-1010 Tool >> 221010 Tool Minimum set: Mechanical tools MW >> SI number

SI number

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

01 15 99 (483)

Consisting of:

3 = 0493698 Synchronizing key

NOTE: For pulling out the transfer box rubber mount - Replaced by 22 1 018 (0 493 807)

3 = 0493699 Washer

NOTE: (Support disc) For installing the transfer box rubber mount - series: E53 - Replaced by 22 1 019 (0 493 808)

3 = 0493700 Synchronizing key

NOTE: For installing the transfer box rubber mount - series:E53

4 = 0493701 Synchronizing key

NOTE: For installing the transfer box rubber mount - series: E46/16, E83

6 = 0493702 Bridge

NOTE: For pulling out the transfer box rubber mount. Series: E46/16, E83

5 = 0493746 Washer

NOTE: Series: E46/16

7 = 0493806 Nut

NOTE: For installing and removing the transfer box rubber mount - series: E46/16

8 = 0493807 Bush

NOTE: For pulling out the transfer box rubber mount - series: E53, E83, E90

9 = 0493808 Washer

NOTE: For installing the transfer box rubber mount - series:E53

10 = 0494780 Washer

NOTE: For installing the rubber mount in the transfer box- transfer box: ATC400 Model series:E83