LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2829 (Front Axle - Repair - E91 (AWD)) >> 3160 Output Shaft >> 31 51 020 Replacing shaft seal for right output shaft >> Necessary preliminary tasks

Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2012 BMW 328xi, 2011 BMW 328xi, 2010 BMW 328xi, 2009 BMW 328xi, and 2008 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Lever shaft seal (1) with a screwdriver (2) out of bearing block (3).

Fig 1: Removing Shaft Seal From Bearing Block Using Screwdriver
G04745232Courtesy of BMW OF NORTH AMERICA, INC.
NOTE: Protective sleeve (2) serves to protect the sealing lips of shaft seal (1) from being damaged when the output shaft is inserted into the bearing block.
Fig 2: Identifying Sleeve And Sealing Lips Of Shaft Seal
G04745229Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Drive in shaft seal with special tool 31 5 130 as far as it will go.

Fig 3: Installing Shaft Seal Using Special Tool 31 5 130
G04745234Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals