LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2829 (Front Axle - Repair - E91 (AWD)) >> 3153 Differential With Bearings >> 31 53 040 Removing and installing/replacing right output shaft bearing block >> Necessary preliminary tasks

Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2012 BMW 328xi, 2011 BMW 328xi, 2010 BMW 328xi, 2009 BMW 328xi, and 2008 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1).

Remove bearing block from oil sump.

Installation: 

Replace O-RING .

Tightening torque 31 60 1AZ .

Fig 1: Identifying Oil Sump Screws
G04745236Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals