LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2829 (Front Axle - Repair - E91 (AWD)) >> 3135 Stabilizer Bar >> 31 35 021 Replacing both rubber mounts of stabilizer mounting on front axle carrier (AWD) >> Necessary preliminary tasks

Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2012 BMW 328xi, 2011 BMW 328xi, 2010 BMW 328xi, 2009 BMW 328xi, and 2008 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Remove retaining bracket (1) and rubber mount (2) on both sides.

Installation: 

Keep retaining bracket (1), rubber mount (2) and stabilizer clean and free from oil and grease.

Fig 1: Identifying Retaining Bracket And Rubber Mount
G04745218Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals