LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2829 (Front Axle - Repair - E91 (AWD)) >> 3110 Front Axle Suspension >> 51 47 491 Removing and installing/replacing rear underbody protection >> Two-part underbody protection

Two-part underbody protection

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2012 BMW 328xi, 2011 BMW 328xi, 2010 BMW 328xi, 2009 BMW 328xi, and 2008 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1).

Detach underbody protection (2) from bracket (3) and remove.

Installation: 

Ensure correct seating.

Centre underbody protection (2) and tighten down screws (1).

Fig 1: Removing Underbody Protection From Bracket
G04726249Courtesy of BMW OF NORTH AMERICA, INC.