27 21 020 Replacing radial shaft seal for output flange (ATC 300)
WARNING: This page is about a different car, the 2012 BMW 328xi, 2011 BMW 328xi, 2010 BMW 328xi, and 2009 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
After completion of work, CHECK TRANSMISSION OIL LEVEL and top up if necessary.
Use only the approved transmission oil. See TRANSFER BOX - OPERATING FLUIDS .
Use only the approved transmission oil. See TRANSFER BOX - OPERATING FLUIDS .
- Remove PROPELLER SHAFT
NOTE:
Operations are identical for REMOVED TRANSFER CASE .