27 10 010 Removing and installing transfer case (ATC 300): Notes
WARNING: This page is about a different car, the 2012 BMW 328xi, 2011 BMW 328xi, 2010 BMW 328xi, and 2009 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
After replacement, the "Repair" service function must be carried out with GT1.
IMPORTANT:
After completing work, check gear oil level and top up if necessary.
Filler plug (1):
Tightening torque 27 00 11AZ .
Gear oil level up to filler edge of filler plug (1).
Use only the approved transmission oil. See TRANSFER BOX - OPERATING FLUIDS .
Filler plug (1):
Tightening torque 27 00 11AZ .
Gear oil level up to filler edge of filler plug (1).
Use only the approved transmission oil. See TRANSFER BOX - OPERATING FLUIDS .
Failure to comply with this requirement will result in serious damage to the transfer box!
IMPORTANT:
After replacement, the "Repair" service function must be carried out with GT1.
IMPORTANT:
After completing work, check gear oil level and top up if necessary.
Filler plug (1):
Tightening torque 27 00 11AZ .
Gear oil level up to filler edge of filler plug (1).
Use only the approved transmission oil. See TRANSFER BOX - OPERATING FLUIDS .
Filler plug (1):
Tightening torque 27 00 11AZ .
Gear oil level up to filler edge of filler plug (1).
Use only the approved transmission oil. See TRANSFER BOX - OPERATING FLUIDS .
Failure to comply with this requirement will result in serious damage to the transfer box!