26 20 001 Replacing front propeller shaft
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2013 BMW 328xi, 2012 BMW 328xi, 2011 BMW 328xi, 2010 BMW 335xi, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Do not move vehicle with engine power once propeller shaft has been removed.
Replace propeller shaft only in conjunction with a new drive flange and radial shaft seal for front axle output.
Replace propeller shaft only in conjunction with a new drive flange and radial shaft seal for front axle output.
IMPORTANT:
- Replacement only: according to installation with BMW diagnosis and information system under control unit function
Perform functional check of transfer box (calibration)
- Remove front propeller shaft.
- Replace OUTPUT FLANGE for front axle output.
- Replace RADIAL SHAFT SEAL for output front axle.