51 75 001 Removing and installing/replacing left or right underbody cover

WARNING: This page is about a different car, the 2012 BMW 328xi, 2011 BMW 328xi, 2010 BMW 328xi, and 2009 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Work shown on E90 by way of example, deviations in detail are possible in other models.

Release clips (1).

Release screws (2).

Remove underbody cover (3).

Fig 1: Identifying Clips, Screws And Underbody Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Replaced damaged clips (1).

Make sure underbody cover (3) is correctly seated.