33 32 021 Replacing left or right trailing arm: Notes
WARNING: This page is about a different car, the 2012 BMW 328xi, 2011 BMW 328xi, 2010 BMW 328xi, and 2009 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If the trailing arm is detached from the rear axle support/wheel carrier, it is necessary after reinstallation to carry out a wheel/chassis alignment check.
Release nuts (1, 3).
Tightening torque (on rear axle support), see 33 32 1AZ .
Tightening torque (on wheel carrier), see 33 32 2AZ .
Unscrew bolts.
Remove trailing arm (2) downward.
Installation:
Note insertion direction of bolts.
Replace self-locking nuts.