Installation sequence
WARNING: This page is about a different car, the 2012 BMW 328xi, 2011 BMW 328xi, 2010 BMW 328xi, and 2009 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
- Install rear differential with workshop jack and special tool 33 4 420
- Insert bolts (1) (do not tighten down)
- Insert screw (2) from front and replace nut (do not tighten down)
- Lower workshop jack
- Tighten down screws (1)
Tightening torque 33 17 1AZ
.
Courtesy of BMW OF NORTH AMERICA, INC.
- Tighten nut (2)
Tightening torque 33 17 1AZ
.