33 11 Rear Differential Case with Cover
WARNING: This page is about a different car, the 2012 BMW 328xi, 2011 BMW 328xi, 2010 BMW 328xi, and 2009 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - REAR DIFFERENTIAL CASE WITH COVER
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Case Covers TRANSMISSION ALLOCATION | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M10 10.9 |
168L 188L 188LW |
55 Nm |
| E81/E82/E87/E88/E90/E91/E92/E93 | M10 10.9 |
215L 215LW |
90 Nm | ||
| E92 | M10 10.9 |
215 with lock | 60 Nm | ||
| 2AZ | Oil filler plug with O-ring | E81/E82/E84/E87/E88/E90/E91/E92/E93/auser S65 | M22 | Replace oil filler plug with O-ring | 60 Nm |
| 3AZ | Oil filler and drain plugs with O-ring | S65 | M22 | Replace oil filler and drain plugs with O-ring | 60 Nm |
| 4AZ | Side cover to housing | S65 | M8 | Tighten down screws in crosswise sequence | 21.7 Nm |