33 21 Output Shaft
WARNING: This page is about a different car, the 2012 BMW 328xi, 2011 BMW 328xi, 2010 BMW 328xi, and 2009 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - OUTPUT SHAFT
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Output shaft to rear axle final drive flange (Torx screw with RIBBED TEETH ) | E81/E82/E87/E90/E91/E92/E93 | M8 | Replace screws | 52 Nm |
| E81/E82/E84/E87/E88/E90/E91/E92/E93 | M10 ZNS3 |
Replace screws | 70 Nm | ||
| E87 | M10 ZNS |
Replace screws | 80 Nm | ||
| E90/E92/E93/S65 | M12 | Replace screws | 120 Nm | ||