33 32 Handlebars and struts

WARNING: This page is about a different car, the 2012 BMW 328xi, 2011 BMW 328xi, 2010 BMW 328xi, and 2009 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

TIGHTENING TORQUE SPECIFICATIONS - HANDLEBARS AND STRUTS

		Type	Thread	Tightening specifications	Dimension
1AZ	Trailing arm to rear axle support	E81/E82/E84/E87/E88/E90/E91/E92/E93	M12	Replace nut. TIGHTEN DOWN BOLT CONNECTION IN NORMAL POSITION.	100 Nm
2AZ	Trailing arm to wheel carrier	E81/E82/E84/E87/E88/E90/E91/E92/E93	M12	Replace nut. TIGHTEN DOWN BOLT CONNECTION IN NORMAL POSITION.	100 Nm
3AZ	Control arm to rear axle support	E81/E82/E84/E87/E88/E90/E91/E92/E93	M12	Replace nut. TIGHTEN DOWN IN NORMAL POSITION.	100 Nm
4AZ	Control arm to wheel carrier	E81/E82/E84/E87/E88/E90/E91/E92/E93	M12	Replace screw. TIGHTEN DOWN IN NORMAL POSITION.
				Jointing torque	100 Nm
				Angle of rotation	90 °
5AZ	Wishbone to rear axle support	E81/E82/E84/E87/E88/E90/E91/E92/E93,	M12	Replace nut. TIGHTEN DOWN IN NORMAL POSITION.	100 Nm
6AZ	Wishbone to wheel carrier	E81/E82/E84/E87/E88/E90/E91/E92/E93	M12	Replace screw and nut. TIGHTEN DOWN IN NORMAL POSITION.
				Jointing torque	100 Nm
				Angle of rotation	90 °
7AZ	Toe arm to rear axle support	E81/E82/E84/E87/E88/E90/E91/E92/E93	M12	Replace nut. TIGHTEN DOWN IN NORMAL POSITION.	100 Nm
8AZ	Toe arm to wheel carrier	E81/E82/E84/E87/E88/E90/E91/E92/E93	M12	TIGHTEN DOWN IN NORMAL POSITION.	100 Nm
9AZ	Camber arm to rear axle support	E81/E82/E84/E87/E88/E90/E91/E92/E93	M14	Replace nut. TIGHTEN DOWN IN NORMAL POSITION.	165 Nm
10AZ	Camber arm to wheel carrier	E81/E82/E84/E87/E88/E90/E91/E92/E93	M14	Replace nut. TIGHTEN DOWN IN NORMAL POSITION.	165 Nm
11AZ	Trailing link to body	E81/E82/E84/E92/auser S65	M8		24 Nm
12AZ	Trailing link to compression strut	E81/E84/E82/E92/auser S65	M12	Replace screw. Jointing torque	100 Nm
12AZ	Trailing link to compression strut	E81/E84/E82/E92/auser S65	M12	Angle of rotation	90 °