31 60 Output shaft
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2012 BMW 328xi, 2011 BMW 328xi, 2010 BMW 328xi, 2009 BMW 328xi, and 2008 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - OUTPUT SHAFT
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Output shaft console to engine oil sump | E84/E90/E91/E92 | M8 | 26.5 Nm | |
| 2AZ | Output shaft to wheel hub | E90/E91/E92 | M27 | Replace collar nut, lightly oil contact surface | 420 Nm |
| 3AZ | Output shaft to wheel hub | E84 | M16 | Replace collar screw and spring | |
| Jointing torque | 210 Nm | ||||
| Torque angle | 90 ° | ||||